Hybrid Solar Inverters
One inverter that does the job of three — solar charge controller, grid-tied inverter, and battery backup — in a single pure sine wave unit. Built-in MPPT, lithium and lead-acid compatible, single- or 3-phase output.
4
Hybrid Models
1 & 3
Phase Options
Built-in
MPPT Charger
ISO 9001
Certified
Three jobs, one inverter
A traditional solar system needs three boxes on the wall — a standalone MPPT charge controller for the panels, a separate inverter for the AC loads, and an automatic transfer switch between grid and battery. A hybrid inverter rolls all three into a single device. That means fewer points of failure, tidier wiring, faster commissioning, and a single firmware stack to monitor over WiFi or RS485.
For homes adding solar to an existing grid connection, hybrid inverters preserve the option to consume grid power, sell excess solar back, and ride through outages on battery — all without a hardware change. Pick single-phase for typical residential loads or 3-phase for villas, light commercial, and agricultural pump installations.
Solar + Storage + Backup
A hybrid inverter combines three roles — solar charge controller, grid-tied inverter, and battery backup — in one wall-mounted box. No separate MPPT controller, no transfer switch, and no extra wiring runs.
Built-in MPPT Charger
Integrated 80–100A MPPT solar chargers with PV input ranges up to 500VDC. Maximum power point tracking maximises harvest from your array in every weather condition, no add-on hardware required.
Lithium & Lead-Acid Compatible
Configurable charging profiles for LiFePO4, gel, AGM, flooded, and tubular batteries. Lithium activation function safely wakes deeply-discharged BMS-protected lithium banks during commissioning.
Smart Mode Switching
Automatic transfer between grid-tied, battery-backup, and pure off-grid modes based on PV availability, battery state of charge, and grid presence. Grid-priority, solar-priority, and battery-priority configurations.
Hybrid Inverter Range
Showing 4 models
